Laser alignment with Fixturlaser

This is a quick guide how to align your machinery with a Fixturlaser alignment tool

                                                                                                          

Turn on the display unit.                                                                                                     Start by mounting the S-unit on the stationary machine, and M on the movable

 

 

                                                                                                                                             

Pull the chain around the shaft and attach it to the hook.                                              Use the rod tool to tighten the chain, the fixture should not slide on the shaft!

 

 

                                                                                                                         

Position the sensors in the same angle.                                                                                                                                                         Turn on the sensors

 

 

 

                                                                                                                      

Start the horizontal shaftalignment program                                                                                                                       Adjust the sensors vertically if necessary.

 

 

 

Touch the tape-measure icon and enter the dimensions.